Below I have listed the basic differences. Feel free to comment further more.
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
Ready Code for Practice.....
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
************************************************************************
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
*
************************************************************************
Modification Log
Date Programmer Request # Description
************************************************************************
06/10/2005 Chetan Shah DV3K919557 Initial coding
************************************************************************
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
*
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
*
selection-screen: end of block 1.
*
********************************************************
********************************************************
*
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*
********************************************************
********************************************************
*
begin the show
*
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
*
*
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
.
-
FORM TRANSFER_XCEL_TO_ITAB *
-
Transfer Xcel Spreadsheet to SAP Internal Table *
-
form transfer_xcel_to_itab.
*
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
*
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
-
FORM BDC_SESSION_OPEN *
-
Open BDC Session *
-
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
-
FORM BDC_BUILD_SCRIPT *
-
Build BDC *
-
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
*
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
*
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
*
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
*
build bdc script
perform bdc_build_script_record
*
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
-
FORM BDC_SUBMIT_TRANSACTION *
-
Submit BDC Session *
-
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
-
FORM BDC_BUILD_SCRIPT_RECORD *
-
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
-
FORM BDC_SESSION_CLOSE *
-
Close BDC Session *
-
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
&----
*& Form read_routing_cache
&----
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
*
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
*
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
*
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
*
*
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
*
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
**
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*
*ENDFORM. " read_last_pp04_operation_cache
&----
*& Form read_routing
&----
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
*
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
*
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
*
*
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
*
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
**
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
&----
*& Form read_wc_on_last_pp04
&----
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
Ready Code for Practice.....
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
************************************************************************
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
*
************************************************************************
Modification Log
Date Programmer Request # Description
************************************************************************
06/10/2005 Chetan Shah DV3K919557 Initial coding
************************************************************************
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
*
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
*
selection-screen: end of block 1.
*
********************************************************
********************************************************
*
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*
********************************************************
********************************************************
*
begin the show
*
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
*
*
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
.
-
FORM TRANSFER_XCEL_TO_ITAB *
-
Transfer Xcel Spreadsheet to SAP Internal Table *
-
form transfer_xcel_to_itab.
*
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
*
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
-
FORM BDC_SESSION_OPEN *
-
Open BDC Session *
-
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
-
FORM BDC_BUILD_SCRIPT *
-
Build BDC *
-
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
*
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
*
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
*
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
*
build bdc script
perform bdc_build_script_record
*
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
-
FORM BDC_SUBMIT_TRANSACTION *
-
Submit BDC Session *
-
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
-
FORM BDC_BUILD_SCRIPT_RECORD *
-
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
-
FORM BDC_SESSION_CLOSE *
-
Close BDC Session *
-
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
&----
*& Form read_routing_cache
&----
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
*
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
*
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
*
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
*
*
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
*
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
**
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*
*ENDFORM. " read_last_pp04_operation_cache
&----
*& Form read_routing
&----
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
*
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
*
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
*
*
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
*
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
**
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
&----
*& Form read_wc_on_last_pp04
&----
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
No comments:
Post a Comment